Steps To Safe and Efficient Tree Removal Service
Anytime you want a safe removal- you must only trust the professionals of the best tree removal services in Texas. Especially if the tree is too large or close to your home.
Surely homeowners can remove small trees on their own – but they can accomplish this task successfully only by following the right steps. So, if you’re planning on a DIY tree removal service for your small-sized tree, first procure the right tree removal equipment and safety gear. Then, carefully follow the steps mentioned below for a safe tree removal job.
6 Steps In DIY Tree Removal Service
Step 1: Inspect The Tree And the Environment
Begin the emergency tree removal process by checking the tree and its surrounding areas. This will warn you of all potential hazards or nearby obstacles if any. Common stumbling blocks that usually shows up during tree removal are:
Telephone wires
Rotting tree branches
Difficulty to assess trees
Address the hazards and devise a tree removal plan accordingly. Also, tree removal service is highly unpredictable. So, it is advisable to rope off the work area and remove any cars or delicate structures prior to the work.
Step 2: Set The Tree Removal Equipment
If the tree is a bit larger, you will have to scale it before removal and use specialized equipment. For that, climb up the tree with the help of a ladder and set up the required lines. Then, set up the equipment including a wood chipper to haul away any green waste.
Step 3: Start Dismantling The Tree
The next step in the tree removal process is to remove parts of the tree section by section. Use a chainsaw for this process.
Start by slowly lowering the segments to a work partner standing below. After climbing down the tree, use the wood chipper to further break down the segments.
Step 4: Cut The Remaining Trunk
After successfully removing the canopy and branches, move onto the tree trunk. There are two ways to cut the tree trunk.
If your tree is located in a difficult spot, cut the trunk into sections and then lower them to the ground. This is similar to how you removed the canopy and branches. The downside of this method is that it takes a considerable amount of time to complete.
In case your tree has adequate space around, fell the remaining trunk. Felling is a trick that cuts the tree at an angle and lets it fall to the ground freely. This technique tends to be quite dangerous (deadly even). Better leave it to the skilled arborists.
Step 5: Dispose Of Remaining Waste
The tree removal processes can leave quite a mess behind. But you shouldn’t delay the cleaning process or else pests and rodents may find a shelter in the debris.
Use a wood chipper to dispose off the green waste like leaves, twigs, branches, and tree trunks. You can also turn this green waste into mulch for use in your garden.
Step 6: Assess And Remove The Stump
The tree removal and stump grinding process go hand in hand. After eliminating the tree, don’t delay the stump grinding process.
This is something we strictly advise homeowners not to DIY. That’s because buying or renting a stump grinder would cost as much as hiring a professional stump grinding service. Not to mention the risk quotient involved in operating and working with the machine.
The Best Tree Removal Tip Is To Hire Professionals
Given the countless risks involved in a tree removal service, it is best to hire expert arborists of Branch Specialist Texas. As the best tree services in Texas, we guarantee a safe, quick & efficient removal of your trees. So, skip the DIY way and contact us right away!
Read this article also to get more information about – Tree Safety: What Kind Of Insurance Should Professional Tree Services in Texas Have?